Hydraulic Injection Molding Machine
The Parameters of Model CHG180 Hydraulic Injection Molding Machine
| Description | Unit | CHG180 | ||
| Injection unit | ||||
| Screw No. | A | B | C | |
| Screw diameter | mm | 45 | 50 | 55 |
| Screw LD ratio | L/D | 23.3 | 21 | 19.1 |
| Theoretical injection capacity | cm3 | 356 | 440 | 532 |
| Injection weight(PS) | g | 324 | 400 | 484 |
| Injection pressure | Mpa | 226 | 183 | 151 |
| Injection rate | g/s | 135 | 165 | 199 |
| Plasticizing capacity(PS) | g/s | 21.2 | 26.5 | 27.6 |
| Screw speed | rpm | 0～170 | ||
| Clamping unit | ||||
| Clamping force | KN | 1800 | ||
| Mould moving distance | mm | 720 | ||
| Tie bar spacing | mm | 480×460 | ||
| Max. daylight | mm | 920 | ||
| Min. mould thickness | mm | 200 | ||
| Ejector stroke | mm | 150 | ||
| Ejector force | KN | 45 | ||
| Ejector bar amount | PC | 5 | ||
| Others | ||||
| Max. pump pressure | Mpa | 17.5 | ||
| Pump motor power | KW | 18.5 | ||
| Heating power | KW | 9.75 | ||
| External dimension(L×W×H) | m | 5.5×1.8×2.2 | ||
| Weight | t | 6.9 | ||
| Material cylinder capacity | L | 25 | ||
| Oil tank capacity | L | 350 | ||
| Frontispiece dimension of mould | Profile dimension of mould |
 |
 |
Our model CHG180 hydraulic injection molding machine is a two platen molding machine. Different injection volumes can be found in there, that is, 190cm3, 233cm3, and 267 cm3. In addition, CHG180 has strong plasticizing capacity, and it can reach 21.2g/s, 26.5 g/s, 27.6 g/s, and even higher. The clamping force is 1800 KN, the internal spur of tie bar is 480×460mm, and the bucket capacity is 25L.
As a primary hydraulic injection molding machine manufacture in China, Ningbo Chap machinery manufacturing company is dedicated to provide you with high quality energy-saving injection molding machines, interval injection molding machines, and rotary table injection molding machines at low price. These products have the benefits of stable performance, easy operation, low noise, and environmental protection. In addition, located in Ningbo, we have the infra-structure of airports, sea ports, highways, etc., at our disposal. You can choose the best way of transportation, depending on your situation. Welcome to contact us.
- Model CHG50 Hydraulic Injection Molding Machine Our model CHG50 hydraulic injection molding machine is a two platen molding machine. Its screw diameter has different sizes for your choice: 26mm, 30mm, 34mm, and more. The maximum screw speed of CHG50 can reach 260 rpm, and the mold clamping force is 500 KN. Injection pressure of the machine is high. You can choose 245Mpa, 184Mpa, 243Mpa, or more in accordance with your requirements. In addition, pump motor power of CHG50 is 11KW. With better rigidity, the mould clamping features high durability and long service life.
- Model CHG128 Hydraulic Injection Molding Machine Our model CHG128 hydraulic injection molding machine is a kind of two platen molding machinery. It has four cylinders. There are different sizes of screw diameters for your choices: 38mm, 42mm, or 45mm. The theoretic injection volume is 190cm3, 233cm3, and 267 cm3. Module capacity is in the 150-430mm range, and clamping force is 1280 KN. This plastic injection molding machine can operate automatically and features long service life and good performance.
